Saturday, May 5, 2012

This is my post for the Design Club IIT Madras Blog. I thought it would be worth sharing it here as well.

I believe a good design should be always simple, precise, clean and straight to the point. Personally, I feel that using a few basic, simple shapes and colours is the best way to reach your audience and convey the right message - because you are trying to say something without artifice or special effects. When it comes to a logo, it should be an appetizer, not the whole buffet! Our logo is not an exception. It has just one kind of shape. A Circle, that’s it! So, if you have ever opened MS Paint and drawn a circle, you are equally capable of doing it. So let’s start.

Step 1

First, we need to create a new document in Photoshop. (File>New) Alternately, you may even press Ctrl+N. I am using 1280x800 px, 96dpi, RGB 8bit, white background. I wish to use it as my desktop wallpaper that’s why I have used 1280x800. You may go ahead and use the screen resolution of your own comp. Once you are done filling in the parameters, go ahead and click ‘Ok’. A new blank document opens in the work area.

Step 2

Next, we select the Elliptical Marquee tool and draw a perfect circle. Perfect circle can be drawn by pressing and holding shift, just like in MS Paint. (Please note that instead of Elliptical Marquee, the Rectangular Marquee tool may be present by default. Click and hold on the Marquee tool icon to select the Elliptical Marquee tool. Check out the screenshot).

Step 3

Click on the colour swatch at the bottom of the left tools panel and select a dark shade of red (#7f030b). You may directly type in the hex code of the colour (without the #) which is used in the logo.

Step 4

Click on the ‘Create new layer’ button on the layer palette at the right (If layer palette is not visible by default press F7) and fill in the red colour using the Paint Bucket tool(Please note that instead of the Paint Bucket Tool, the Gradient tool may be present by default. Click and hold on the  tool icon to select the Paint Bucket Tool. Check out the screenshot). The circle which you have made using the Marquee tool is just a demarcation which decides the area where the colour will be filled. The same Marquee tool can be used to select any area / shape etc in Photoshop. The selected thing can then be filled with colour, deleted, cut, copied etc.

Step 5

Now, we just need to make some concentric rings and we are done. The easiest way to make a ring is to make two concentric circles of two different sizes in two different layers and delete the region of the smaller circle from the bigger one. To create concentric circles just duplicate the layer in which the red circle is present by pressing Ctrl+J. When you duplicate the layer, it won’t be visible in the work area because both the circles will be exactly same and they will be in the same position. You may change the colour of the duplicate circle to differentiate it from the original. I ll go ahead and make it black. 

Go to the Duplicate Layer on the layer palette. Press and hold Ctrl and click on the layer on the layer palette. This will make a selection around the circle, a similar one which you have made using the Elliptical Marquee tool. Now fill it with black. Now we will reduce the size of the black circle. Press Ctrl+T and you will be able to resize the circle just as you do it in MS Word. To keep it concentric press and hold Shift+Alt. Once you are done with the resizing, go ahead and press Enter.
Now, we again press and hold Ctrl and click on the layer of the small black circle on the layer palette. This will again make a selection around the circle. Now, click on the layer of the red circle on the layer palette. When the selection is still active, press delete. This will remove the area of the small black circle from the big red circle. Now, you can completely delete the layer of the black circle and you are left out with a red ring.

Step 6

Similarly create another ring and place both them like the way they are placed in the logo. So now the layer palette has 3 layers. The red circle, Ring 1 and Ring 2.

Step 7

Now we just have to reduce the opacities of the individual layers. Set the opacity of the layer of the red circle to 70%. Ring 1 to 50% and Ring 2 to 20%. 

Step 8

Now select all the three layers in the layer palette by pressing Ctrl, just as you select multiple icons in Windows. Once selected, press Ctrl+G to group the 3 layers. (Grouping is not mandatory; it is just for better organization. It is similar to creating a folder in Windows) Now 'group 1' has the red elements. Similarly create 3 more groups for the Blue, Green and Yellow circles. You may re-size a  group by pressing Ctrl+T. You may use #538ba5 for blue, #90bd52 for green and #ecbd0f for yellow.
Selecting the 3 layers

Grouped Layers

Step 9

After creating all the 4 groups, place them in their proper positions.

Step 10

Go to Windows>Character to make the Character panel visible. Type in ‘design’ with Century Gothic font, bold, and (-75) character spacing. The font size depends on how big the circles which you have made are. I have used Ctrl+T to resize the text layer to best fit into the logo. Similarly, type ‘club’ with Century Gothic font, bold, and (-50) character spacing and align the two words so that ‘i’ in 'design' lies in the same vertical line with the ‘l’ of 'club'. Now we will make some minor changes to the words so that they become unique. 
Please note that a text layer is not directly editable because it in the vector mode. We need to convert it to the raster (pixel) mode. To do this we select the text layers, right click on them and select ‘Rasterize type’.

Step 11

Next, select the ‘l’ of ‘club’ using the Rectangular Marquee tool and delete it. Now, we select a small part of the ‘i’ of ‘design’ using the Rectangular Marquee tool, press Ctrl+T and extend the ‘i’ to form the ‘l’ of ‘club’. Similarly, extend the ‘b’ of club to merge with the ‘n’ of design. Now select the layers, design and club, in the layer palette and press Ctrl+E to merge them. Now type ‘the’ and ‘iitm’ and place them in appropriate places. Rasterize ‘the’ and extend the ‘t’ and ‘h’ of ‘the’ beyond the red circle. Now merge all the 3 layers again by pressing Ctrl+E.

Step 12

Next, Select the four groups, Groups 1 – 4, and press Ctrl+E to merge them. So, now you are left out with just 2 layers in your palette, the layer with the text and the layer with the circles. 

Step 13

Now, press and hold Ctrl and click on the text layer in the layer palette to make a selection around the text. Now while the selection is active, go to the circles layer and press delete!
Now, go to the text layer and completely delete the whole layer by clicking on the delete button and Tada... you have successfully made the logo!

Step 14

Now let’s give it a wallpaper look by applying a subtle gray gradient in the background. Resize your logo and place it in the centre of the wallpaper (or any other area of your choice). Select white as the foreground and any light gray as the background colour. I have used # dbdbdb. Select the gradient tool and select the radial gradient mode. Now create a new layer below the logo layer. With the gradient tool selected, click on the centre of the wallpaper and drag it to any one of the corners to fill in the new layer with the radial gradient.
If you feel the logo is looking very pale just duplicate the logo layer by pressing Ctrl+J and set the blending mode of the new layer to ‘Multiply’. This will brighten it up. 
Once you follow all these steps, you should get something similar to the image below. This concludes our tutorial. I advise you to experiment with this logo by applying your own touch of style to it, and make sure you show off your work in our Facebook page I hope that you've learnt something new from my tutorial, feel free to email us on

Thursday, July 14, 2011

This is one of my favourite posters of Shaastra 2011. The best part of this poster is that everything except that green bit of bush on the first matchstick, is self made (not googled). The other day when I was lighting an agarbatti, I noticed something which I never did before. The head of the half burnt matchstick which I dropped seemed to look like a small bush of black leaves.This triggered something in my mind which i do not usually get, an IDEA! My bro, Sargam quickly took a few shots of the partially burned matchstics with his new Canon IXUS 115 HS and I started tweeking them with my first love, Photoshop:) Then came the toughest part of finding 'just the right' bush for the matchstick. Googled through hundreds of images... Finally selected this one, although I wasn't fully satisfied. A little bit of 'warp' and 'transform' made the bush look almost perfect! Finally the Rewind and Wind buttons were made in Cinema 4d and with few more movements and resizing, the second "Environmental Awareness Poster" was ready.

Wednesday, May 18, 2011

One of my first few 3D renders in Cinema 4D. Very addictive..! Every piece was individually modeled and textured. Had to play around a lot with the lighting settings. Btw, can you guess where the knights are?;)

Sunday, March 13, 2011

This one's for Saras...

Did you ever notice that the human hand actually resembles the body of a swan? This is dedicated to the Insti General elections, 2011 and the 10th wing of Saraswati Hostel.

Friday, December 3, 2010

The Saarang Dollar

What if the Saarang 2011 grub coupons looked like this??? ;-)

Thursday, September 16, 2010

Coord Badge

I was asked to design a badge for the coordinators. Faheem said that the coord badge of Shaastra 2008 was nice and he wanted me to do something similar. The old badge had some gears nicely blended in black. So i too started looking for gears... found many, liked a few and finally selected this one. I thought black would look decent. For the other one Hersh suggested that a hand drawing the dice would be symbolic, indicating Coords making Shaastra happen. Thats all for petty badges!! Lets which one gets approved.

Wednesday, September 15, 2010

Coordinator's tee

Felt like designing a coordinator tee, though it is not the most important thing to be done by the Shaastra 2010 Design team at this moment. Frankly speaking i (kind of) got the idea from a random google image search. I liked it... Dont mind wearing it! If you don't like it, don't ever see it... And if you are maadddly waiting to wear this, hold on... it is yet to be finalized.

Thursday, September 2, 2010

The Godav Tee...

Gen Sec is offering a whooping 1k for the best design, "How can I not design one...???" So I had to design a T Shirt for my hostel Godavari. (The landing page image has been designed by me!).  And as usual my mind went blank and I ran out of ideas. Couldn't think of something which could attract attention of hostel junta and of course, the 1k as well! I suddenly remembered Gang'a'ster... a spoof previously used by Ganga hostel. I somehow came across 'The Godfather'. The next step was to merge it with Godavari which later formed the front part of the tee. Wanted to keep the back simple with a one liner. Thats all the tee seemed to be ready. Indeed.... Geeks dream, Gods do... and I did!

Friday, August 27, 2010

'Shaastraarth' is the official blog of Shaastra. This template is for Internal Publicity (IP) of the blog. So insti people, get ready to see this frequently on your hostel Notice boards.Wanted to give it an Indian feeling... something desi! So i just googled for some font which looks like Devnagri. This font is called 'Samarkan'. Hmmm.... well i guess i got what i wanted.

Tuesday, August 24, 2010

I get a call from Jithin at 9:30 PM. He tells me to to come to Cavity's room. As soon as I enter the room, I get to know it's my cup of tea... Graphic Designing! They are the coords of this Shaastra event called IQ. They even managed to get a collaboration from 'Mensa-high IQ society'. Then began... The Quest for the next pseud looking poster. Partially inspired by a poster of the movie 'Rajneeti' this is mostly Pratul, Jordy, Bibhu and Cavity's idea.. Kudos to all of them, and also to me for making it happen!

Friday, July 23, 2010

Shaastra for Dummies

SHAASTRA for Dummies... available only at IIT Madrads..lolzzz! Come be a part of it 29th Sep - 3rd Oct. Want to use it in a tee. Hope no copyright issue arises..

Wednesday, July 14, 2010

Tried my hands at typography portraits... Well it does look like Albert Einstein, doesn't it..!! Filled it up with SHAASTRA. I guess its okay for being the first..:-)

Thursday, July 8, 2010

Another SHAASTRA Wallapaper..  Girls... you can try this out! Cool na?

Tuesday, July 6, 2010

Apparently some IITians are working their asses off for something called SHAASTRA... Find out why so between Sept 29 - Oct 3.... (Rahul Swamy)
This is one of such work... a Shaastra Wallpaper! (needless to say, its scaled down)